In case you are investing in a stair with balusters in a contrasting material, including painted balusters on an oak stair, questions will probably arise concerning the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters installed when the stair is completed?

Here are a few facts to consider with Stair Company Suffolk County: Your painter will generally opt for painting the balusters before installation. This allows them to be sprayed rather than brushed and eliminates lots of “cut-in” work.

Painting balusters separately also means that this stair installers will need to revisit the web page, eliminate the railings and install the balusters. You will have charge for this “second trip” for the jobsite. You will have to remember to schedule this “second trip” in coordination with the finishing of the finish.

Leaving your balusters out for painting means that they will probably be lost or stolen during this period. You will be in charge of balusters left at the jobsite. After the painted balusters are finally installed, you will have additional “touch-up finishing required at the rail joints. Holes will have to be filled and stain and finish re-applied for the ultimate finish.

Plan installing of your hardwood stair for after your drywall has been taped, sanded, and primed. The drywall process can cause damage to the stair. Drywall mud and paint overspray will make the stair finishing process very difficult and may even make desired results impossible to achieve.

Most hardwoods are a wide open grain wood and once dirt gets embedded in open grain it is quite challenging to remove, even with sanding. This will use a negative effect on the appearance and texture of the finish. Care must also be taken to safeguard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic fails to allow airflow, trapping moisture underneath and resulting in the wood to grow and contract. This expansion and contraction causes the wood joints to open up up and could cause the wood to break into.

The environmental conditions indoors are important to the standard of the stair. Hardwood lumber has become dried by way of a very controlled process for an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to stay stable under normal conditions.

In cold climates, when a house is heated to your high temperature during winter, the air may become very dry, creating the wood to shrink. This shrinkage can make cracks visible within the wood and joints can start to open up. Subjecting a stair to high degrees of heat is like putting it in an oven and can accelerate the deterioration from the stair.

All hardwoods must be sealed on all sides to retard movement and protect from being exposed to elements and damage. It is strongly recommended to seal wood immediately.